- Transformer with 225 cm of cable and plug
- 1x LIGHT SENSOR
- 2x Screw
- 1x short Screw
- 4x CABLE CAP MEDIUM
- 4X CAPLE CAP STANDARD
A high-quality transformer with touch screen operation and maximum installation value of 50 VA equipped with two lines that are controlled jointly.
- Maximum installation value of 50 VA
- Fitted with a touchscreen, 2 cable outlets and a light sensor
- Expandable with motion detector
Install the HUB-50 where it is not exposed to rain or snowfall
Features the following functions:
- Easy touch screen operation
- Two jointly controlled cable entries
- Manual On and Off commands
- Switched on using light sensor (included) combined with timer (included)
- Equipped with light signal to detect and prevent overload or incorrect installation
- MOVE motion detector available as a separate accessory. Lighting switches on automatically for 1, 3 or 9 minutes after motion detection
Innovation is part of the in-lite DNA. The HUB series is synonymous with innovative and modern products made of high-quality materials offering optimum safety.
The HUB PROTECTOR extends the life of the HUB-50. We emphasize that all HUBs should always be mounted in a covered area free of precipitation.
Install free of precipitation
We emphasize that all HUBs should always be mounted in a covered area free of precipitation. When it is not possible to install the HUB inside or under a roof, we advise to install the HUB PROTECTOR over the HUB-50.
Specs
Installation instructions
- HUB PROTECTORHUB protective cover
- MOVEMotion detector
- MOVE-EXT CORD 5MTRMOVE motion detector extension cord
