Enlarge image

Radiating light on all sides, the PUCK ground light is perfect as indication lighting along a driveway, walkway, duckboards or jetties.

  • Produces a subtle radiating light on all sides
  • Designed for illuminating the edges of a driveway, walkway or deck
  • Drive-over
Installation advice:

A PUCK every 1½ to 2 meters

Light Grey
In stock
Art. nr.
10104160
Specifications
Features

The PUCK ground light is perfect as indication lighting along your driveway, walkway, duckboards or jetties. Since the light radiates from the side, it is visible from a long distance, but without being glaring, making the PUCK also highly suitable for creating ambiance. The PUCK is made of anodized aluminum in warm silver. The PUCK series is available in two different formats and colors: PUCK (DARK) has a diameter of 60 mm, while PUCK 22 (DARK) has a diameter of 22 mm. 

Specs

Color
Light Grey
EAN
8717051004278
Height mm
58
Height inch
2.28
Mounting depth mm
55
Mounting depth inch
2.17
Diameter Inch
3.39
Diameter mm
86
Mounting diameter mm
60
Housing
Polycarbonate
Ring/Cover plate
Aluminum
Voltage
12 volt
Electric potential
2.5VA
Power
1.5W
Light source
LED
Lighting direction
Ambient
Lighting reach ft
0.82
Lighting reach m
0.25
Burn time
25000
Color temperature
2900
CRI
96
Net Luminous Flux
11lm
Energy label
G
IP-class
67
Application
Deck, Driveway, Fence, Path
Processing
Concrete, Grass, Gravel, Natural stone, Wood
Luminous Efficacy
8lm/W
Features
Drive-over

Installation instructions

Installation instructions
This ground light is installed in a hole in wood (using a wood drill) or stone (using a water-cooled diamond drill) with a diameter of 60 mm. A dealer or landscaper can install it for you if desired. Important: This fixture must be installed in a straight drill hole of the right size to ensure that it fits snugly and does not cause damage to the surface. Handy installation cup The PUCK (DARK) comes with a stainless steel installation cup. This ring makes it possible to install – and remove - the spot light easily and without connection to the power supply. You simply press the spot light together with the cup into the hole. No hammer needed. The springy tabs on the cup make sure the spot is always installed snugly. The stainless steel installation cup is not available separately and cannot be used (yet) with the other fixtures.
 
System
Cables & transformer
 

Read all about the system and installation tips.

More information
Back to top