- Lighting design service
- Language
- Account My account
Transformers
The in-lite system operates at 12 volts (low voltage). This means that the 230 volts of power from the socket is converted to 12 volts by a transformer. This is a safe voltage, making in-lite lighting easy to connect and reposition by the consumer.
HUB-50 & HUB-100
The HUB-50 and HUB-100 are the standard transformers in our range. They are operated with a touchscreen and you can connect 50VA or 100VA to them. You can divide these over two cable outlets, but keep in mind that they cannot be operated separately.
More HUB-100SMART HUB-150
The SMART HUB-150 is operated using the in-lite app. You can connect up to 150VA in fixtures to the transformer, divided over three cable outlets if desired, each of which can be operated separately.
More SMART HUB-150Protect your transformer
We recommend installing your SMART HUB-150, HUB-50, or HUB-100 in a covered location. If this isn’t possible, use a PROTECTOR to shield your transformer from all forms of precipitation. Our PROTECTORs are made of high-quality plastic and can withstand any weather conditions.
| HUB-50 | HUB-100 | SMART HUB-150 | |
| Max. permitted voltage | 50 VA | 100 VA | 150 VA |
| Operation method | Touchscreen | Touchscreen | in-lite app |
| No. of ground cables (lines) | 2 lines | 2 lines | 3 lines |
| Separate line operation | × | × | √ |
| Manual on/off | √ | √ | √ (d.m.v. in-lite app) |
| Day/night switch | √ (light sensor) | √ (light sensor) | √ (astronomical clock) |
| Timer function | √ (hours on) | √ (hours on) | √ (minutes on) |
| Motion detector | MOVE (wired) | MOVE (wired) | SMART MOVE (wireless) |
| Overload short circuit notification | √ | √ | √ |
| Installation outdoor possible | √ at >50cm | √ at >50cm | √ at >50cm |
