The MOVE motion detector for the HUB-50/100 transformers comes with a two-meter cable, but can be extended to up to 22 meters using one or more MOVE EXT CORD 5 MTR.
The MOVE motion detector comes with a two-meter cable, but can be extended to up to 22 meters using one or more MOVE EXT CORD 5 MTR.
No, this is not possible. The MOVE motion detector was developed specially for use with the HUB-50/100, while the SMART MOVE motion detector was developed for the SMART HUB-150.
Yes, the MOVE motion detector for the HUB-50/100 is active if set to light/dark and/or motion detector. The SMART MOVE motion detector for the SMART HUB-150 must be charged for around three hours in direct daylight before being used for the first time. You use the in-lite app to add the SMART MOVE and configure the settings. For more information, see the manual.
The time setting of the MOVE motion detector is shown on the touch screen of the HUB-50/100 if the motion detector has been connected correctly. The SMART MOVE motion detector for the SMART HUB-150 transformer is operated and controlled using the in-lite app. For more information, see the manual.
You set the time in the MOVE using the touchscreen on the HUB-50/100. You can choose from 1, 3 or 9 minutes. The lighting will stay on for the number of preset minutes when motion is detected in the dark. The SMART MOVE is set using the in-lite app. The number of minutes that the lighting stays on after movement is detected can be set by the minute, cable and routine. For more information, see the manual.
The SMART MOVE only functions in the dark. The number of minutes that the lighting stays on after movement is detected can be set by the minutes, cable and routine. The MOVE is active if set to light/dark and/or motion detector. It is possible to set the time period after which the lighting switches off after movement is detected to 1, 3 or 9 minutes. For more information, see the manual.
It is possible to connect several wireless SMART MOVE motion detectors to one SMART HUB-150 transformer. A different time can be set in each of these. Once connected, they operate jointly in a mesh network. Several SMART HUB-150 transformers can also be connected to a single motion detector. This is NOT possible with the MOVE motion detector for the HUB-50/100 transformers. One transformer can be used with one motion detector and vice versa.
No, this is not possible with the MOVE for the HUB-50/100 transformers. One transformer can be used with one motion detector and vice versa. It is, however, possible to connect several wireless SMART MOVES to a SMART HUB-150 transformer. A different time can be set in each of these. Once connected, they operate jointly in a mesh network. Several SMART HUB-150 transformers can also be connected to a single motion detector.
The MOVE for the HUB-50/100 and the SMART MOVE for the SMART HUB-150 transformers are usually mounted at a height of two meters onto a wall or fence. For more information, see the manual.
This is possible in principle, with the exception of devices that emit considerable heat, such as the outlet of a high-efficiency boiler. The MOVE and SMART MOVE motion detectors are triggered by radiant heat.
The top of our products can be recognized by the in-lite logo. This logo should be easy to see.
The detection angle or area is 40 degrees vertically and 105 degrees horizontally. See the MOVE and SMART MOVE product pages for more information.
The MOVE and SMART MOVE motion detectors are triggered by radiant heat. Small animals do not emit enough heat, so the motion detector will not respond to them.
Yes, clean the MOVE/ SMART MOVE motion detector sensor using a wet cloth at least once a year.
Yes, the MOVE and SMART MOVE have rain protection and an IP value of 65.
Yes, but only in a vertical direction by tilting the MOVE or SMART MOVE motion detector downwards. This is done to limit the detection area.
No, but tilting the MOVE or SMART MOVE motion detector downwards can limit the detection area.
Check whether the motion detector is still connected properly, that the transformer is set properly and/or whether the motion detector (front) is clean. Otherwise, check the manual. If this concerns a SMART MOVE, it is also possible that the solar panel has not charged the internal battery. To charge it, set it in direct daylight for around three hours. Still not working? Contact your landscaper or dealer who sold you the product.
No, the MOVE is specially developed for the HUB-50/100, while the SMART MOVE is specially developed for the SMART HUB-150.