A maximum of 4 BIG NERO (NARROW) fixtures can be connected to one HUB-50, while the maximum for the HUB-100 is 7 BIG NERO (NARROW) fixtures. A maximum of 9 fixtures can be connected to the SMART HUB-150. Make sure to divide them among 2 or 3 cable outlets. The BIG NERO (NARROW) can only be connected to a 10/2 cable with a maximum length of 40 meters.
It is not possible to dim 12 V lighting connected to the transformer. There are a few 230V wall lights in the range that are dimmable. To choose the right dimmer, see the product page for the wall light concerned.
in-lite offers a five-year warranty on all fixtures. We do not guarantee operational hours. However, the manufacturer of the LED light sources used in our fixtures provides an indication of the service life of its light sources. This indication is 25,000 operational hours and is based on an ideal situation without any form of possible influences. Consequently, this cannot be compared to the actual circumstances under which a fixture with the LED light source is used. Factors such as weather, incorrect installation and alternating currents in the power supply can have a negative impact on the number of operational hours. More information on our warranty policy can be found on the Warranty & Repairs page.
No, we do not have any fixtures in our range with a sensor. The HUB-50/100 transformers are equipped with a light sensor that switches the lighting on automatically when it's dark. The SMART HUB-150 uses an astronomical clock.
A number of our ground lights can be used in, for example, a driveway. See the selection of drive-over grong lights in our product overview.
All in-lite fixtures are suitable for outdoor use. Fixtures with LED light sources are waterproof (also see the IP values for our products), but are not designed to be used permanently under water. Use our underwater spotlight instead.
Yes, all in-lite fixtures, from LED to halogen, can be combined in the system. For the best possible light output, consider the capacity of the transformer and maximum cable lengths. For more information, see the Installation Tips page and the manuals for our transformers and cables.
The DISC WALL 12V is not dimmable, but the DISC WALL 100-230V is.
The DISC PENDANT 12V is not dimmable, but the DISC PENDANT 100-230V is.
No, the DISC (LOW) is not dimmable.
With an external LED dimmer only. Connect the DISC WALL 100-230V to an external LED dimmer with trailing edge and a wattage of 2-100W or 3-100W.
No, the DISC PENDANT 100-230V does not require an external dimmer. It is dimmable without an external LED dimmer. In other words, the light does not have to be connected to a switched power outlet.
Yes, it can. But this may not be an LED dimmer. Important: If you want to use an external switch, keep in mind that when the switch is in the OFF position, the light cannot be operated by the sensor. Also, the light will be subjected to an automatic calibration process the first 15 seconds each time the external switch is switched from the OFF to the ON position. During this time, do not place a hand or conductive objects near the sensor because this will interfere with calibration.
The DISC PENDANT 100-230V is dimmable by hand movement. The sensor is located on the bottom of the fixture in the middle and is operated by hand approach. Brief touch/approach: On/Off Long touch/approach: Dim The dimmer remembers the last position when switched off manually by the sensor.
If disconnected from the power supply completely (using, for example, an extra switch) and then reconnected, the light will be in the highest setting when switched on by hand movement. The light will also be subjected to an automatic calibration process the first 15 seconds each time it is disconnected from the power supply. During this time, do not place a hand or conductive objects near the sensor because this will interfere with calibration.
Yes, they can. The DISC PENDANT 100-230V fixtures can be operated separately.