Installation - in-lite app

That is correct. Anyone can decide the name for the yard, even if shared with others using the app. A landscaper, for example, may give the yard a name that is relevant for his work, while the owner can give the yard a different name.

Try the following tips: 1. Reduce the distance to the installed (and previously connected) SMART HUB-150. 2. Disconnect any devices that are connected unnecessarily. 3. Make sure the Bluetooth connection is not disrupted by a material like metal or a microwave or Wi-Fi router.

Different routines can be set in the in-lite app. See the manual for the in-lite app.

The SMART HUB-150 is controlled with your smartphone or tablet at a distance of up to tens of meters. Subsequent SMART 150-HUBs may enable a larger distance between the SMART HUBs of several hundred meters.

The minimum required version for iOS devices is iOS 11.0. The minimum required version for Android devices is Android 5.0.

The in-lite app makes it possible to control 3 cable outlets on the transformer separately. It is not possible to control multiple fixtures on a single line separately.

It is possible to operate several SMART HUB-150s with the in-lite app. It is even possible to control several outdoor spaces.

The app settings can be shared using a special share function. Multiple devices can then operate the lighting. See the manual for the in-lite app.

The in-lite app is available free of charge in the Google Play Store and Apple App Store.

Check in the settings of your phone/tablet whether you have given the in-lite app permission to use your location. If not, change this. Delete the routines already set and configure new ones.

You can check this in the in-lite app. Go to Settings --> Garden --> SMART EXTENDER. If there is no connection to the SMART EXTENDER, it may not be connected properly or is outside the reach of the SMART HUB-150.

This can be found in the in-lite app. Go to Settings --> Garden --> SMART EXTENDER. Here you can see whether the SMART EXTENDER is connected to your Garden.

You can do this in the in-lite app. Go to Settings --> Garden --> SMART EXTENDER. Add the SMART EXTENDER to your Garden.

Yes, it is possible to add several SMART EXTENDERs to one Garden. This will increase the reach between your phone and the SMART HUB-150.

There could be several reasons for this. Here are a few tips for making a Bluetooth connection or reconnecting: 1. First check whether the smart light is receiving power through the cable. 2. In the settings in your phone or tablet, check whether Bluetooth is switched on. 3. Check whether there is a connection with the SMART HUB to which the smart light is connected. 4. Reduce the distance between the smart light installed (and already connected) and the SMART HUB. 5. Increase the distance between the smart light and other wireless devices. A disruption may occur. 6. Ensure that the distance between the smart light and large metal objects/structures is as large as possible and make sure that the smart light is not being blocked.

Yes, this is possible. You can dim or change the color of smart lights connected to the same cable at the same time. Use the dim slider or color presets for this. You cannot dim or change the color of smart lights connected to a different cable at the same time.

The smart light can be reset using a magnet. The placement of the magnet is indicated on the driver. 1. Place the magnet at the indicated spot or on the lens of the SMART SCOPE TONE. The smart light will flash briefly. This means that the smart light has detected the magnet, indicating that it is placed in the right spot. 2. Hold the magnet in this spot until the smart light flashes several times. 3. The magnet can then be removed and the smart light is now reset. It is important during installation to ensure that the driver is still reachable. This makes it possible to reset the smart light again in the future. In addition, a smart light can only be reset if receiving power, which means that the light zone must be switched on. A smart light that is not (yet) connected to a yard will continuously change light intensity.

There could be several reasons for this. Here are a few tips for making a Bluetooth connection or reconnecting: 1. First check whether the SMART BRIDGE is receiving power through the adapter. 2. In the settings in your phone or tablet, check whether Bluetooth is switched on. 3. Check whether there is a connection with the SMART HUB in that specific yard. 4. Reduce the distance between the SMART HUB installed (and already connected) and the SMART BRIDGE. 5. Ensure that the distance between the SMART BRIDGE and large metal objects/structures is as large as possible and make sure that the SMART BRIDGE is not being blocked.

With the SMART BRIDGE, the in-lite system can be integrated with ‘smart home’ systems like Google Home, Apple Homekit and Amazon Alexa. This means, for example, that you can use the Google Home app to operate the in-lite system.