Enlarge image

Dark

Radiating light on all sides, the PUCK DARK ground light is perfect as indication lighting along a driveway, walkway, duckboards or jetties.

  • Produces a subtle radiating light on all sides
  • Designed for illuminating the edges of a driveway, walkway or deck
  • Drive-over
Installation advice:

A PUCK every 1½ to 2 meters

In stock
SKU
10104165
Light grey
Go to store locator
Details

Radiating light on all sides

The PUCK DARK ground light is perfect as indication lighting along your driveway, walkway, duckboards or jetties. Since the light radiates from the side, it is visible from a long distance, but without being glaring, making the PUCK also highly suitable for creating ambiance. The PUCK DARK is made of anodized aluminum in dark gray. The PUCK series is available in two different formats and colors: PUCK (DARK) has a diameter of 60 mm, while PUCK 22 (DARK) has a diameter of 22 mm.

More Information

General

General
ProductgroupIntegrated
EAN8717051004339
Height mm58
Height inch2.28
Mounting depth mm55
Mounting depth inch2.17
Diameter mm86/60
Diameter Inch3.39
HousingPolycarbonate
Ring/Cover plateAluminum
Voltage12V
Power1.5W
Electric potential2.5VA
Light sourceLED
Burn time25000
Light angle180° & 360°
Lighting directionAmbient
Light distribution m0.25
Light distribution ft0.82
Color temperature2900
CRI96
Net Luminous Flux11lm
Luminous Efficacy8lm/W
IP-class67
Energy LabelB
DimmableNo
UsesDeck, Driveway, Fence, Path
Installing ground lightsConcrete, Grass, Gravel, Natural stone, Wood
FeaturesDrive-over
VerwerkingsadviesThis ground light is installed in a hole in wood (using a wood drill) or stone (using a water-cooled diamond drill) with a diameter of 60 mm. A dealer or landscaper can install it for you if desired. Important: This fixture must be installed in a straight drill hole of the right size to ensure that it fits snugly and does not cause damage to the surface. Handy installation cup The PUCK (DARK) comes with a stainless steel installation cup. This ring makes it possible to install – and remove - the spot light easily and without connection to the power supply. You simply press the spot light together with the cup into the hole. No hammer needed. The springy tabs on the cup make sure the spot is always installed snugly. The stainless steel installation cup is not available separately and cannot be used (yet) with the other fixtures. To learn how to install the in-lite system, watch the instruction videos on the installation tips page.
Installation Instructions and Downloads
This ground light is installed in a hole in wood (using a wood drill) or stone (using a water-cooled diamond drill) with a diameter of 60 mm. A dealer or landscaper can install it for you if desired.

Important: This fixture must be installed in a straight drill hole of the right size to ensure that it fits snugly and does not cause damage to the surface.

Handy installation cup
The PUCK (DARK) comes with a stainless steel installation cup. This ring makes it possible to install – and remove - the spot light easily and without connection to the power supply. You simply press the spot light together with the cup into the hole. No hammer needed. The springy tabs on the cup make sure the spot is always installed snugly. The stainless steel installation cup is not available separately and cannot be used (yet) with the other fixtures.

To learn how to install the in-lite system, watch the instruction videos on the installation tips page.
 
System
Cables & transformer
 

Read all about the system and installation tips.

More information
Back to top