A high-quality transformer with touch screen operation and maximum installation value of 100 VA equipped with two lines that are controlled jointly.
- Maximum installation value of 100 VA
- Fitted with a touchscreen, 2 cable outlets and a light sensor
- Expandable with motion detector
Install the HUB-100 where it is not exposed to rain or snowfall
The HUB-100 transformer is easily connected to an main outlet by an UK standard adapter plug (included free of charge).
Features the following functions:
- Easy touch screen operation
- Two jointly controlled cable entries
- Manual On and Off commands
- Switched on using light sensor (included) combined with timer (included)
- Equipped with light signal to detect and prevent overload or incorrect installation
- MOVE motion detector available as a separate accessory. Lighting switches on automatically for 1, 3 or 9 minutes after motion detection
Innovation is part of the in-lite DNA. The HUB series is synonymous with innovative and modern products made of high-quality materials offering optimum safety.
Install free of precipitation
We emphasize that all HUBs should always be mounted in a covered area free of precipitation. When it is not possible to install the HUB inside or under a roof, we advise to install the HUB PROTECTOR over the HUB-100.
|Installation instructions||Install vertically using the screws provided. The transformer can be mounted on a wall both inside and outside. When installed outside, the transformer must be at least 50 cm from the ground.|