Product - DISC
The DISC WALL 12V is not dimmable, but the DISC WALL 100-230V is.
The DISC PENDANT 12V is not dimmable, but the DISC PENDANT 100-230V is.
With some clearance. Do not hang the DISC PENDANT (100-230V) lights close together.
A place with some clearance. Do not hang the DISC PENDANT in a windy area.
No, the DISC (LOW) is not dimmable.
With an external LED dimmer only. Connect the DISC WALL 100-230V to an external LED dimmer with trailing edge and a wattage of 2-100W or 3-100W.
No, the DISC PENDANT 100-230V does not require an external dimmer. It is dimmable without an external LED dimmer. In other words, the light does not have to be connected to a switched power outlet.
Yes, it can. But this may not be an LED dimmer. Important: If you want to use an external switch, keep in mind that when the switch is in the OFF position, the light cannot be operated by the sensor. Also, the light will be subjected to an automatic calibration process the first 15 seconds each time the external switch is switched from the OFF to the ON position. During this time, do not place a hand or conductive objects near the sensor because this will interfere with calibration.
The DISC PENDANT 100-230V is dimmable by hand movement. The sensor is located on the bottom of the fixture in the middle and is operated by hand approach. Brief touch/approach: On/Off Long touch/approach: Dim The dimmer remembers the last position when switched off manually by the sensor.
If disconnected from the power supply completely (using, for example, an extra switch) and then reconnected, the light will be in the highest setting when switched on by hand movement. The light will also be subjected to an automatic calibration process the first 15 seconds each time it is disconnected from the power supply. During this time, do not place a hand or conductive objects near the sensor because this will interfere with calibration.
No, this is not possible. The DISC PENDANT is installed using a strain relief. The plug provided can be used on the end of the cable after guiding it through the ceiling.
The DISC PENDANT can be adjusted to different heights as desired. Important: The maximum cable length is 220 cm.
Yes, the DISC PENDANT (100-230V) is waterproof and designed to withstand the elements.
No, the DISC BASE and DISC BASE TRIPLE can only be used with the DISC PENDANT 100-230V.
Yes, they can. The DISC PENDANT 100-230V fixtures can be operated separately.