Yes, the EVO FLEX can easily be cut to size along the indicated markings. These markings are indicated by a scissors symbol. If the EVO FLEX is cut to size, the ends must be covered with the EVO FLEX WATERLOCK, which is included with the EVO FLEX DRIVER 1. The EVO FLEX PROFILE accessory can also easily be cut to size with a saw. We recommend using a saw with small teeth.

No, this is not possible. Every EVO FLEX must have its own EVO FLEX DRIVER 1. Connect the grey cable of the EVO FLEX DRIVER 1 to the EVO FLEX and connect the black cable to the EASY-LOCK. It is also not possible to use the EVO FLEX in combination with a SPLITTER.

No, the EVO FLEX cannot be used in combination with a SPLITTER.

Yes, the EVO FLEX with EVO FLEX DRIVER 1 can also be used under water. Keep in mind that the mini-connectors must be placed outside the water or used in combination with a WATERLOCK. A mini-connector is the link between the fixture and the EASY-LOCK (or extension cord/CBL-EXT CORD). If the EVO FLEX DRIVER 1 is also placed under water, the WATERLOCK must be used to make the mini-connector between the EVO FLEX and the EVO FLEX DRIVER 1 waterproof.

Yes, the EVO FLEX DRIVER 1 also be installed under the surface.

Yes, this is possible using the EVO FLEX EXT-CORD 1. This is the only extension cord that can be connected to it and can be recognized by its grey color. The EVO FLEX EXT-CORD 1 is one meter long, which is the maximum length that can be used. An in-lite extension cord can be used between the EASY-LOCK and the EVO FLEX DRIVER 1. The maximum extension cord length is four meters. Use one of the other standard in-lite extension cords (CBL-EXT CORD).

Yes, a separate EVO FLEX DRIVER 1 is needed for every EVO FLEX. Lock the grey connectors together. It is not possible to connect several EVO FLEX strips together.

For optimal functioning of the EVO FLEX (1, 2, 3), it is advisable to connect the fixture to a CBL-40 10/2 ground cable.

These two assembly accessories are special mounting brackets for creating curves with a 90-degree angle with the EVO FLEX (1, 2, 3) and consist of two sections. one for the EVO FLEX and the other for the ground cable. If you want to use the EVO FLEX (1, 2, 3) in an outside curve, use the EVO FLEX CORNER OUTSIDE. If you want to use the EVO FLEX (1, 2, 3) in an inside curve, use the EVO FLEX CORNER INSIDE.

No, an EVO FLEX DRIVER 1 is needed for every EVO FLEX. Connect the grey cable of the EVO FLEX DRIVER 1 to the EVO FLEX and connect the black cable to the EASY-LOCK.

The EVO FLEX accessories can also be installed without screws. It is not always possible to use screws because, for example, there is not enough space or when installing on a hard surface like stone.

Always install the EVO FLEX PROFILE using a fixative. The fixative must be suitable for outdoor use and be UV and weather-resistant. It must also have high initial adhesion and be permanently elastic after hardening.

To securely install the EVO FLEX, place an EVO FLEX CLIP every 15 cm.

Yes, the EVO FLEX WATERLOCK can be reused. The MINI WATERLOCK can be reused a maximum of ten times. Handle the MINI WATERLOCK carefully after disconnecting it. so that the gel in the MINI WATERLOCK does not get dirty.

- Remove the EVO FLEX 1, 2 or 3 slowly and carefully from the profile. When removing the EVO FLEX 1, 2, 3, make sure it is not pulled out of the profile at a 90-degree angle because this could cause irreparable damage.

The EVO FLEX can be bent to a maximum of 90 degrees. It is only possible to create curves to the left and/or right. The EVO FLEX cannot be bent upwards or downwards. Keep this in mind when installing and removing the EVO FLEX.

Yes, the EVO FLEX DRIVER 1 can also be placed under water. Keep in mind that the mini-connectors must be placed outside the water or used in combination with a WATERLOCK. A mini-connector is the link between the EVO FLEX and the EVO FLEX DRIVER 1 and between the EVO FLEX DRIVER 1 and the EASY-LOCK (or extension cord/CBL-EXT CORD).

No, it is not possible to install the EVO FLEX without any accessories. You can use the EVO FLEX PROFILE, EVO FLEX CORNER INSIDE, EVO FLEX CORNER OUTSIDE and/or the EVO FLEX CLIPS.