The SPIKE accessory makes it possible to install a ground light in a loose surface like soil, gravel or grass.
- Makes it possible to install the ground light in soil, gravel or grass
- Suitable for ground lights with a diameter of 60 mm
- Easy to install and uninstall
Thanks to the SPIKE, the ground light remains securely in place. This accessory also gives you the possibility to be creative when installing your ground lights. You simply place the ground light in the SPIKE and push the ground spike into the desired location in the surface.
This accessory can be used with all in-lite ground lights with a diameter of 60 mm. If you have an in-lite ground light with a diameter of 22 mm, you can use the SPIKE 22.
|Installation instructions||SPIKE is suitable for processing in loose substrate such as soil, gravel, or grass. Remove the cable from the soil pot through the cable opening of the SPIKE and then push the soil pot into the SPIKE. Then insert the soil pin at the desired place in the soil. To simplify placement, we recommend digging a suitable hole in the ground. The soil pin can then easily be placed into the soil by hand. Read the manual for a detailed instruction.|
Read the manual for a detailed instruction.