FUSION 22
The FUSION 22 fixture is small, but refined. This subtle 22 mm diameter fixture is virtually invisible during the day.
- Produces a soft light that does not glare
- Designed for illuminating a walkway or deck
- Drive-over
Installation advice:
A FUSION 22 every 1½ to 2 meters
In stock
SKU
10104100
Details
Non-blinding light
The FUSION 22 fixture is small, but refined. This subtle 22 mm diameter fixture is virtually invisible during the day. It produces a soft non-blinding light in the evening. This makes the FUSION 22 suitable for in, for example, paths, steps and decks.
Watch the installation recommendations video for information on connecting this ground light
More Information
General
| Productgroup | Integrated |
| Height mm | 32 |
| Height inch | 1.26 |
| Mounting depth mm | 50 |
| Mounting depth inch | 1.97 |
| Diameter mm | 22 |
| Diameter Inch | 0.87 |
| Mounting diameter mm | 22 |
| Housing | Polycarbonate |
| Voltage | 12V |
| Power | 0.2W |
| Electric potential | 0.2VA |
| Light source | LED |
| Burn time | 25000 |
| Light angle | 97° |
| Lighting direction | Upwards |
| Light distribution m | 0.25 |
| Light distribution ft | 0.82 |
| Color temperature | 2750 |
| CRI | 93 |
| Net Luminous Flux | 1lm |
| Luminous Efficacy | 5lm/W |
| IP-class | 67 |
| Energy Label | A+ |
| Uses | Deck, Path |
| Installing ground lights | Concrete, Grass, Natural stone, Wood |
| Features | Drive-over |
| Installation instructions | This ground light is installed in a 22.4 mm diameter hole in stone (cooled diamond-tipped drill). When installing in wood, we recommend using the FUSION 22 stainless steel. A dealer or gardener can do this for you. Note: to avoid problems with the electronics, only install the fixture in a hole that has been drilled straight and in the correct size. Watch the instructional videos on the installation tips page for information on installing the in-lite system. |
Installation Instructions and Downloads
This ground light is installed in a 22.4 mm diameter hole in stone (cooled diamond-tipped drill). When installing in wood, we recommend using the FUSION 22 stainless steel. A dealer or gardener can do this for you. Note: to avoid problems with the electronics, only install the fixture in a hole that has been drilled straight and in the correct size. Watch the instructional videos on the installation tips page for information on installing the in-lite system.
Check items to add to the cart or
-
FUSIONThe soft glow of the FUSION LED ground light allows you to subtly illuminate, for example, your deck or driveway.
Out of stock -
