The BRACE is an accessory for installing SCOPE fixtures in combination with the RISER 1 on a wall or fence. In combination with the BRACE BAND, the BRACE can be installed on a tree trunk, branch or post. When used with the BRACE BAND and RISER 1 accessories, the BRACE can also be used to install a SCOPE fixture at a distance on a tree trunk, branch or post.
For installing a SCOPE spotlight on a wall or fence.
Comes with a clasp for installing the BRACE BAND.
Can be easily combined with the RISER 1 accessory.
The BRACE makes it possible to install SCOPE fixtures at a height on a wall or fence. In combination with the RISER 1 accessory, this is the perfect way to install the light source further away from the wall or fence. Combined with the BRACE BAND, installation is also possible on a tree trunk, branch or post without causing any damage.NOTE: SCOPE spotlights available separately.Not suitable in combination with the SCOPE CEILING. Several BRACE accessories can be installed on a single BRACE BAND.
Fence/wall , Tree
Install the BRACE on the wall or fence using the mounting hardware provided. Install the SCOPE of choice on a BRACE by installing the mounting bracket on the BRACE using the rotatable clamp provided. The connector cable on the fixture can be clamped and concealed by means of the grooves in the casing. The SCOPE 360˚ can be rotated after installation. The angle of this fixture can be adjusted. This makes it possible to direct the light upwards or downwards. The BRACE can be easily combined with the BRACE BAND and RISER 1 accessories in order to install a SCOPE spotlight at a distance on a wall or fence.
NOTE: SCOPE spotlights available separately.
Not suitable in combination with the SCOPE CEILING.
A special tree band is available for the BRACE called the BRACE BAND. The BRACE has a clasp for installing the BRACE using the BRACE BAND on a tree trunk or post. The BRACE BAND is made of elastic EPDM and can easily be cut to size.
NOTE: The BRACE BAND comes on a roll of 10 meters.