Wall luminaire ACE UP-DOWN provides a directional beam of light upwards and downwards, and is suitable for mounting on a wall or fence. The light sources are located deep inside the luminaire so the light does not glare. The light can be adjusted in width with the separately available SHUTTER 1. ACE UP-DOWN is available in 5 different colours: Dark Grey, White, Rose Silver, Corten and Flat Grey.
TIP: Consider an extension cable.
A high-quality FCBV coating in the colour Rosé Silver. Combines well with other luminaires in the same colour.
TIP: Consider an extension cable.
A high-quality FCBV coating in the colour Rosé Silver. Combines well with other luminaires in the same colour.
- Produces a focused upward and downward light
- Suitable for illuminating a fence and wall
- Light scene can be adjusted with several accessories
Installation advice:
An ACE DOWN every 2 to 2½ meters at a height of 1.4 to 1.8 meters
In stock
Art. nr.
10301900
in stock, delivered within 3 working days
IN THE PACKAGE
INCLUDED IN PACKAGE
- ACE UP-DOWN
- EASY-LOCK
- 2x Nylon plug
- 2x Screw
- 1x Torx wrench
Product overview
Product Details
ACE DOWN wall fixture produces a focused beam of light and can be mounted on a wall or fence. The light source lies deep within the fixture to ensure the light is not blinding. The width of the light provided by the ACE DOWN can be adjusted using the separately available SHUTTER 1.
Specs
Art. nr.
10301900
Application
Canopy, Facade, Fence/wall , House
Mounting depth (inch)
0
Recessed depth (mm)
0
CRI
92
Color
Rose Silver
EAN code
8717051003554
Energy label
G
Height (inch)
4.7244
Height (mm)
120
IP class
55
Length (inch)
3.7402
Length (mm)
95
Light direction
DownAndUp
Types of Light
Direct
Efficiency (Lumen/Watt)
55
Net luminous flux (Lumen)
355
Order unit
6
Power [W]
6.5
Processing
Concrete, Wood
Article group
Wall
Voltage
12 volt
VA value
10.3
Width (inch)
2.5197
Width (mm)
64
Color temperature
3000
Material finishing/coating
FCBV
Luminous intensity [Cd]
205.8
Power factor
0.63
Installation instructions
Installation advice
With the light source already mounted, the luminaire is immediately ready for use. You therefore do not need to install the light source first. During installation, however, please note that all components are accessible for replacement.<br />
<br />
Remove the Torx screw with the Torx spanner provided. Remove the cover from the luminaire. Provide a hole of at least Ø 13 mm in the wall for the passage of the cable. Do this at the place where the top half of the armature will later sit over it. Fix the fitting's mounting plate to the wall with the corresponding screws. Refit the luminaire's cover to the mounting plate. Tighten the Torx screw. Connect the EASY-LOCK connector to the main cable.
<br /><br />
We recommend cleaning the luminaire at least once a year with a clean cloth and warm water.
