FAQ Search Results

The connection fails often, even though it is possible to reconnect each time. How can I improve the connection?

Try the following tips: 1. Reduce the distance to the installed (and previously connected) SMART HUB-150. 2. Disconnect any devices that are connected unnecessarily. 3. Make sure the Bluetooth connection is not disrupted by a material like metal or a microwave or Wi-Fi router.

Is the DISC (LOW) dimmable?

No, the DISC (LOW) is not dimmable.

Can I connect the SMART EXTENDER to the CB-081, CB-056, HUB-50 or HUB-100 transformers?

No, the SMART EXTENDER only works with the SMART HUB-150.

Where do I find the SMART EXTENDER in the in-lite app?

To find the SMART EXTENDER in the in-lite app, go to Settings --> Garden --> SMART EXTENDER.

Can I switch off the SMART EXTENDER?

Yes, you can switch off the SMART EXTENDER by removing the plug from the power outlet.

Can I reset the SMART EXTENDER?

Yes, you can reset the SMART EXTENDER by holding in the button for 15 seconds until it starts blinking. Important: The SMART EXTENDER is now no longer part of the Garden in the in-lite app. To add it again, go to Settings --> Garden --> SMART EXTENDER.

I no longer need the SMART EXTENDER for part of or my entire Garden. Can I use the SMART EXTENDER for a different Garden?

Yes, you can. Remove the SMART EXTENDER by resetting it. The SMART EXTENDER can now be found for a different Garden. Select the other Garden in the in-lite app under Settings --> Garden and Add the SMART EXTENDER here. Important: A connection to the Garden is needed to add the SMART EXTENDER.

Is the DISC WALL (100-230V) dimmable?

The DISC WALL 12V is not dimmable, but the DISC WALL 100-230V is.

Is the DISC PENDANT (100-230V) dimmable?

The DISC PENDANT 12V is not dimmable, but the DISC PENDANT 100-230V is.

How far apart should I hang the DISC PENDANT (100-230V) lights?

With some clearance. Do not hang the DISC PENDANT (100-230V) lights close together.

Where is the best place to hang the DISC PENDANT (100-230V)?

A place with some clearance. Do not hang the DISC PENDANT in a windy area.

Is the DISC PENDANT (100-230V) weather-resistant?

Yes, the DISC PENDANT (100-230V) is waterproof and designed to withstand the elements.

Can the DISC PENDANT also be installed directly in or on the ceiling?

No, this is not possible. The DISC PENDANT is installed using a strain relief. The plug provided can be used on the end of the cable after guiding it through the ceiling.

How high should I hang the DISC PENDANT (100-230V)?

The DISC PENDANT can be adjusted to different heights as desired. Important: The maximum cable length is 220 cm.

What happens if the DISC PENDANT 100-230V is disconnected from the power supply?

If disconnected from the power supply completely (using, for example, an extra switch) and then reconnected, the light will be in the highest setting when switched on by hand movement. The light will also be subjected to an automatic calibration process the first 15 seconds each time it is disconnected from the power supply. During this time, do not place a hand or conductive objects near the sensor because this will interfere with calibration.