Enlarge image
Assembly anchor BLINK / WEDGE

FIX 1

FIX is a mounting plate to easily attach various fixtures to masonry or stacked low walls/benches/stairs.

FIX 1 is a mounting plate for BLINK and WEDGE.
FIX 3 & 4 are mounting plates for various applications of EVO HYDE 180.
FIX 5 is a mounting plate to mount EVO HYDE 550 at a 90 degree angle.
  • Assembly anchor for installing on wall and stacked elements
  • Easy to install and uninstall
  • Easy to install and uninstall
Art. nr.
10702900
Product overview
Product Details
FIX is a mounting plate to easily attach various fixtures to masonry or stacked low walls/benches/stairs.

FIX 1 is a mounting plate for BLINK and WEDGE.
FIX 3 & 4 are mounting plates for various applications of EVO HYDE 180.
FIX 5 is a mounting plate to mount EVO HYDE 550 at a 90 degree angle.

Specs

Art. nr.
10702900
EAN code
8717051003035
Length (inch)
2.9528
Length (mm)
75
Order unit
6
Article group
Related products
Width (inch)
3.3465
Width (mm)
85

Installation instructions

Installation advice
FIX accessories all have a different application.<br /> With FIX 1, you simply install the BLINK wall-mounted luminaire on a wall of Crack & Stack elements, for example, without drilling. You screw the luminaire onto the mounting anchor and then place the anchor between 2 wall sections as shown in the drawing above. <br /><br /> The practical FIX 3 mounting plate is easy to brick in between 2 wall sections of, for example, stacked walls/benches. Both EVO HYDE luminaires can easily be attached to the FIX 3. When fitting the EVO HYDE 550, we recommend first snapping the fitting onto the FIX 3 accessory. <br /><br /> The FIX 4 and FIX 5 corner profiles have a high-quality look that runs in line with the sleek 18cm and 55cm LED strips. These FIX accessories are therefore especially suitable when the EVO HYDE luminaires hang more in plain sight. The EVO HYDE 180 can be mounted on the FIX 4 and the EVO HYDE 550 on the FIX 5.
Back to top