Radiating light on all sides, the PUCK ground light is perfect as indication lighting along a driveway, walkway, deck boards or jetties.The EASY-LOCK is supplied as standard with this luminaire. The cable length on this luminaire is 60 cm.Tip: Think of an extension cable
Produces a subtle radiating light on all sides
Designed for illuminating the edges of a driveway, walkway or deck
The PUCK 12V Light Grey ground light is perfect as indication lighting along your driveway, walkway, deck boards or jetties. Since the light radiates from the side, it is visible from a long distance, but without being glaring, making the PUCK also highly suitable for creating ambiance. The PUCK is made of anodized aluminum in warm silver. The PUCK series is available in two different formats and colors: PUCK has a diameter of 60 mm, while PUCK 22 has a diameter of 22 mm.
Specs
Art. nr.
10104165
Application
Driveway, Fence/wall, Path, Patio, Stairs
Mounting depth (inch)
2.1654
Recessed depth (mm)
55
CRI
96
Diameter (inch)
3.3858
Diameter (mm)
86
Color
Black
EAN code
8717051004339
Energy label
G
Height (inch)
2.2835
Height (mm)
58
IP class
67
Light direction
All around
Light type
Diffuse
Efficiency (Lumen/Watt)
8
Net luminous flux (Lumen)
11
Order unit
6
Power [W]
1.5
Processing
Concrete, Grass, Gravel, NaturalStone, Wood
Article group
Integrated
Voltage
12V
VA value
2.5
Color temperature
2900
Luminous intensity [Cd]
1.34
Power factor
0.6
Installation instructions
Installation advice
This ground light is installed in a hole in wood (using a wood drill) or stone (using a water-cooled diamond drill) with a diameter of 60 mm. A dealer or landscaper can install it for you if desired.
Important: This fixture must be installed in a straight drill hole of the right size to ensure that it fits snugly and does not cause damage to the surface.
Handy installation cup
The PUCK (DARK) comes with a stainless steel installation cup. This ring makes it possible to install – and remove - the spot light easily and without connection to the power supply. You simply press the spot light together with the cup into the hole. No hammer needed. The springy tabs on the cup make sure the spot is always installed snugly. The stainless steel installation cup is not available separately and cannot be used (yet) with the other fixtures.