• High-quality Dutch design
  • Energy efficient & durable
  • Easy & flexible
  • 5 year warranty
More information

The in-lite 12 volt system

Easy & flexible

in-lite outdoor lighting is based on low voltage (12 volts). Our lighting is safe and easy to install, customize and expand. Get to know the most important components of our system.

The transformer
The transformer controls the lighting with the help of a light sensor and, if desired, a timer. The transformer can be plugged into any electrical outlet.

The cable
The 12-volt cable is rolled out from the transformer and guided along the fixtures. It can end anywhere in the yard and does not have to form a closed system. Seals are installed to finish and protect the end of the cable.

The Easy-Lock
The Easy-Lock connects the fixture with the 12 volt cable. The connection provides power to the fixture. You can read more about how our Easy-Lock works below.

Fixture & mini-connector
Every fixture has a cable with a mini-connector that connects to the Easy-Lock system.

in-lite 12 volt system
in-lite transformer
in-lite 12 volt cable
in-lite extension cord

Cable Connector CC-2 and extension cord

In addition to the basic components for a working in-lite system, we also offer a number of useful extra system components. Cable connectors allow you to easily create one or more cable branches to guide the cable past the various fixtures. And if you want to install an outdoor light a bit farther away from the main 12 volt cable, just use an extension cord. These are placed between the mini connector on the fixture and the Easy-Lock.

The in-lite Easy-Lock

How the Easy-Lock & CC-2 cable connector work

The Easy-Lock and CC-2 cable connector can be literally connected with the flick of a wrist. A cable clamp is used to secure the cable in the connector. Tightening the cap presses the contacts into the insulating material on the cable. This creates a firm connection. The special gel in the connector protects the connection against moisture and other external influences. The cable sheath material ensures the cable is not damaged. This means that it is no problem to move the Easy-Lock and CC-2 and you can easily adjust your lighting at any time.

in-lite installationtips

Installing the system yourself? Watch our instructional videos!

Are you planning on installing the in-lite lighting yourself? Then be sure to visit our page with handy installation tips and instructional videos. You will then be ready to deliver a professionally installed in-lite system.

To the installation tips