installing in-lite in 5 easy steps
In-lite outdoor lighting is based on low voltage (12 volts).Our lighting is therefore safe and easy to install yourself. You create a professionally
installed system in just five steps. If you choose to install the in-lite lighting yourself, read this page carefully and watch the videos.
step 1: transformer
This video shows you how to properly install the transformer and light sensor. The transformer controls the lighting and powers the system.
step 2: 12 volt cable
You can now roll out the cable. The cable carries the current and causes the fixtures to illuminate.
Install it along paving and borders as much as possible for easy access.
step 3: easy-lock
Every fixture includes an Easy-Lock which ensures good electrical conduction and that your light gives off the most light.
step 4: mini-connector
The mini-connector connects the fixture to the Easy-Lock. The soft PVC casing protects the connection from moisture and dirt.
step 5: fixture
Finally, install the fixture at the desired location. Follow the instructions and installation recommendations in our product manuals.