PUCK fixtures shine all around and provide a subtle, non-glare light. The fixture is available in two sizes (Ø 22mm & Ø 60mm) and two colors (Black & Pearl Grey). Ideal to use as indication lighting along paths, terraces and driveways.
- Produces a subtle radiating light on all sides
- Designed for illuminating the edges of a driveway, walkway or deck
- Drive-over
Installation advice:
A PUCK 22 every 1½ to 2 meters
Art. nr.
10104175
IN THE PACKAGE
INCLUDED IN PACKAGE
- 1x EASY LOCK
- 60 cm Fixture cable
- Baffle plate
Product overview
Product Details
The small PUCK 22 ground spot is perfect as subtle indicator lighting for your driveway, path, deck or jetty. PUCK 22 has a diameter of 22 mm and is finished with an anodized aluminum cap. The light from the ground spots can be seen from a great distance due to the side exit. Because of its non-glare light, PUCK 22 can also be used as an ambient light. The PUCK series comes in two different sizes and colors: PUCK has a diameter of 60 mm, PUCK 22 has a diameter of 22 mm.
Specs
Art. nr.
10104175
Application
Driveway, Fence/wall , Garden path, Stairs, Terrace
Mounting depth (inch)
2.1654
Recessed depth (mm)
55
CRI
96
Diameter (inch)
1.378
Diameter (mm)
35
Color
Black
EAN code
8717051004346
Energy label
G
Height (inch)
1.4567
Height (mm)
37
IP class
67
Light direction
All around
Light type
Diffuse
Efficiency (Lumen/Watt)
5
Net luminous flux (Lumen)
3
Order unit
6
Power [W]
0.6
Processing
Concrete, Grass, Gravel, Natural stone, Wood
Article group
Integrated
Voltage
12 volt
VA value
0.6
Color temperature
2900
Luminous intensity [Cd]
0.45
Power factor
1
Installation instructions
Installation advice
You process this soil pot in a hole in wood (wood drill) or stone (cooled diamond drill) with a diameter of 22 mm. A dealer or gardener can take care of this for you.
Attention! Install the fixture only in a straight drilled hole in the right size to ensure that the spot is properly clamped without damaging the house.
Handy tapping plate
PUCK 22 (DARK) comes with a tapping plate (60x60x5 mm). You use it during assembly to prevent damage to the anodized cap.
