A high-quality transformer, equipped with two jointly controllable lines.
- Button operation
- 2 cable outlets and a light sensor
- Expandable with MOVE motion detector, individually configurable per line
Installation advice:
Install where it is not exposed to rain or snowfall
Out of stock
Art. nr.
10500520
Product overview
Product Details
A high-quality transformer with button operation equipped with two jointly controllable lines.
Equipped with the following features:
Simple operation
Two jointly controllable line inputs
Manual on/off
Switching by means of supplied light sensor combined with a timer
Equipped with light signal to detect and prevent overloading or faulty installation, for example
The motion detector MOVE can be connected as a separately available accessory. The lighting automatically switches on either 1, 3 or 9 minutes upon motion detection. Option to control both or one of the lines via the MOVE.
With the HUB series you choose an innovative and innovative product, made of high-quality materials with optimal safety. The HUB PROTECTOR extends the life of the HUB. We emphasize that all HUBs should always be mounted covered in a place free of precipitation. Install free of precipitation. If it is not possible to install the HUB indoors or under a roof, we recommend installing the HUB PROTECTOR.
Equipped with the following features:
Simple operation
Two jointly controllable line inputs
Manual on/off
Switching by means of supplied light sensor combined with a timer
Equipped with light signal to detect and prevent overloading or faulty installation, for example
The motion detector MOVE can be connected as a separately available accessory. The lighting automatically switches on either 1, 3 or 9 minutes upon motion detection. Option to control both or one of the lines via the MOVE.
With the HUB series you choose an innovative and innovative product, made of high-quality materials with optimal safety. The HUB PROTECTOR extends the life of the HUB. We emphasize that all HUBs should always be mounted covered in a place free of precipitation. Install free of precipitation. If it is not possible to install the HUB indoors or under a roof, we recommend installing the HUB PROTECTOR.
Specs
Art. nr.
10500520
EAN code
8717051007170
Height (inch)
2.9528
Height (mm)
75
IP class
23
Length (inch)
8.4646
Length (mm)
215
Power [W]
75
Article group
Transformers
Voltage
230 volt
VA value
75
Width (inch)
4.9213
Width (mm)
125
Installation instructions
Installation advice
Mount vertically using the screws provided. The transformer can be mounted on a wall both indoors and outdoors. Outdoors, the transformer must be mounted with HUB PROTECTOR, at least 50 cm from the ground and protected from precipitation.
<br /><br />
Read the manual for detailed instructions.
<br /><br />
We pay a lot of attention to the quality of our products and want you to be able to enjoy your lighting without any worries. That is why we offer a 5-year warranty on our fixtures and transformers when the installation instructions are followed correctly.